Smart Digital Valve Positioner Double Acting Angular Stroke Fail Safe Exposion Proof
Smart Digital Valve Positioner Double Acting Angular Stroke Fail Safe Exposion Proof TOP-5879F1-C41-11-RDG-21OYA2 — Rotary Double-Acting Digital Series Product Overview The TORLEO TOP-5879F1-C41-11-RDG-21OYA2 is a digital (smart) valve positioner of the Rotary Double-Acting Digital Series, a rotary ...
Angular Stroke Digital Valve Positioner
,Digital Valve Positioner double acting
,Smart Digital Valve Positioner
Smart Digital Valve Positioner Double Acting Angular Stroke Fail Safe Exposion Proof
The TORLEO TOP-5879F1-C41-11-RDG-21OYA2 is a digital (smart) valve positioner of the Rotary Double-Acting Digital Series, a rotary (quarter-turn) digital positioner for ball valves and other 0–120° rotary actuators, in a die-cast aluminum housing. A microprocessor (CPU) runs a PID predictive closed-loop control: it compares the 4–20 mA set-point with the feedback and drives the pilot stage to balance the two output ports (OUT1 & OUT2) of the double-acting actuator. When the valve is at rest the CPU fully closes the pilot air path, so the steady-state air consumption ≤ 0.056 Nm³/h — near zero. Its feedback spindle rotates 0–90° / 0–120° and is read by a microprocessor-based non-contact, high-resolution magnetic sensor, with no mechanical linkage wear or signal jump. Enclosure IP66; explosion protection Ex d IIC T6 Gb; functional safety IEC 61508 SIL 3.
When we serve global process-industry customers, and from our recent project data, a digital positioner’s value lies in its processor. Unlike an old force-balance analog positioner, a digital unit uses a microprocessor (CPU) to run an advanced closed-loop PID predictive control: it compares the 4–20 mA set-point with the non-contact feedback, then drives the pilot stage to balance the two output ports (OUT1 & OUT2) of the double-acting actuator. At steady state the CPU shuts the pilot air path completely, so the steady-state air consumption falls to ≤ 0.056 Nm³/h — near zero — instead of the continuous bleed of a force-balance unit, directly cutting the plant’s compressed-air network running cost. In the field our engineers: (1) run one-touch auto-tuning from the handheld communicator or the built-in panel for an immediate calibration; (2) read online diagnostics straight from the unit — valve opening %, friction change and stroke cycle counter; and (3) on very long bus runs, use the algorithm to compensate the pneumatic lag so the valve does not lag the set-point.
- Linear Single-Acting Digital Series — pneumatic diaphragm / straight-through globe valves, travel 10–150 mm
- Linear Double-Acting Digital Series — high-thrust pneumatic piston cylinders, travel 10–150 mm
- Rotary Single-Acting Digital Series — spring-return ball / butterfly valves, 0–120°
- Rotary Double-Acting Digital Series — high-torque double-acting ball / butterfly valves, 0–120° ◀ this series
Semantic isolation: a quarter-turn unit (0–120° feedback) is a different mechanical family from a straight-stroke positioner (10–150 mm). Every product here is Rotary Double-Acting Digital and must not be listed as compatible with linear globe or diaphragm valves, just as a linear digital positioner must never be paired with a ball or butterfly valve.
Model: TOP-5879F1-C41-11-RDG-21OYA2
| Item | Indicator |
| Input signal | 4~20mA |
| Sensor type | N/A |
| Gas source | pressure 1.4~6bar; no oil, no moisture, no dust and dirt |
| Stroke / Travel | 0~120° |
| Input resistance | 490 Ω (max.) / 20 mA DC |
| Electrical interface | M20*1.5 or custom |
| Pneumatic interface | NPT1/4 |
| Repeatability | ±0.3%F.S. |
| Linear | ±0.3%F.S. |
| Hysteresis | ±0.3%F.S |
| Sensitivity | ±0.2%F.S |
| Output characteristics | linear, quick opening (25:1, 50:1), equal percentage (1:25, 1:50) |
| Protection class | IP66 |
| Explosion-proof grade | Ex d IIC T6 Gb |
| Security level | SIL3 |
| Fault state |
failsafe Off power, off signal, off gas, the valve is in the initial state |
| Operating temperature | -30℃~75℃ |
| Material | die-cast aluminum |
| Gross weight | 3.4Kg |
| Dimensions | 162L*152W*182H (mm) |
Technical matrix: Rotary Double-Acting Digital Series. This page covers angular-stroke (rotary) positioners only, with 0–90° / 0–120° feedback. A straight-stroke positioner (10–150 mm) cannot be fitted to a rotating ball or butterfly valve without a special mechanical conversion, so this category contains no straight-stroke or linear diaphragm-valve pairings.
- double-acting ball valves (floating and trunnion-mounted)
- double-acting butterfly valves (concentric / offset)
- V-port / segmented ball valves
- plug and eccentric rotary valves
- damper / louver air valves
On site we commission the loop in three steps: verify the 4–20 mA at the terminals, confirm a dry, oil-free air supply at 1.4–6 bar, then run a one-touch auto-tune and check linearity across 0–120°. We trend the online data (opening %, friction, stroke cycle count) to track valve health, and on long bus runs we tune the control algorithm to overcome pneumatic lag. With a vibration-resistant terminal block and non-contact magnetic feedback, the unit keeps its zero and span, and stays at ≤ 0.056 Nm³/h when the valve is at rest.
- Microprocessor (CPU) PID predictive closed-loop control — not an old force-balance analog design
- Near-zero steady-state air consumption (steady-state air consumption ≤ 0.056 Nm³/h) — cuts the plant compressed-air running cost
- One-touch auto-tuning from handheld communicator or built-in panel
- Online diagnostics: valve opening %%, friction change and stroke cycle counter
- Algorithmic compensation of pneumatic lag on very long bus runs
- IEC 61508 SIL 3; Ex d IIC T6 Gb; IP66
Trust anchors for the whole family: functional safety — IEC 61508 SIL 3, certified by TÜV NORD; explosion protection — Ex ia IIC T4 Ga (intrinsically safe) / Ex d IIC T6 Gb (flameproof); ingress protection — IP66; energy efficiency — steady-state air consumption ≤ 0.056 Nm³/h.
IEC 61508 SIL 3 (TÜV NORD)Ex ia IIC T4 GaEx d IIC T6 GbIP66Air ≤ 0.056 Nm3/hDigital (Microprocessor)Rotary Double-Acting Digital Series
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.