Die Cast Aluminum Feedback Not Explosion Proof Double Acting Electropneumatic Valve SIL3
Die Cast Aluminum Smart Valve Positioner Double Acting Straight Stroke TOP-5879F1-11-LDP-21OYA1 — Linear Double-Acting Electro-Pneumatic (I/P) Valve Positioner Product Overview The TORLEO TOP-5879F1-11-LDP-21OYA1 is an electro-pneumatic (I/P) smart valve positioner of the Linear Double-Acting Series...
Die Cast Aluminum electropneumatic valve
,Not Explosion Proof Feedback electropneumatic valve
,Double Acting Die Cast electropneumatic valve
Die Cast Aluminum Smart Valve Positioner Double Acting Straight Stroke
The TORLEO TOP-5879F1-11-LDP-21OYA1 is an electro-pneumatic (I/P) smart valve positioner of the Linear Double-Acting Series, for straight-stroke control valves (10–150 mm travel), in a die-cast aluminum housing. It converts the 4–20 mA control signal linearly into the pneumatic pressure the actuator needs: the current drives a coil / nozzle-flapper pilot stage whose output pressure feeds the two output ports (OUT1 & OUT2) to balance the double-acting actuator. Enclosure IP66; explosion protection Non-explosion-proof (standard); functional safety IEC 61508 SIL 3.
When we serve global process-industry customers, and from our recent project data, we see that an electro-pneumatic positioner stands or falls on the stability of its electro-to-pneumatic (I/P) conversion. The 4–20 mA loop is compared against the feedback of a non-contact magnetic sensor; the resulting error drives the pilot stage, which varies the nozzle-flapper back-pressure and hence the output air pressure, so the valve follows the set-point linearly. The field enemies are three: (1) at high ambient temperature the coil drifts thermally and shifts the I/P zero and gain — we compensate this in the circuit and provide an easy on-site re-zero; (2) dirty or wet, oily instrument air clogs the pilot-stage nozzle and flapper — we specify filtered, dry, oil-free air (1.4–6 bar) and design the pilot stage for easy cleaning; and (3) high-frequency site vibration loosens the electrical contacts — vibration-resistant terminals, strain-relieved wiring and non-contact feedback eliminate the problem.
- Linear Single-Acting Series — pneumatic diaphragm / straight-through globe valves, travel 10–150 mm
- Linear Double-Acting Series — high-thrust pneumatic piston cylinders, travel 10–150 mm ◀ this model
- Rotary Single-Acting Series — spring-return ball / butterfly valves, 0–120°
- Rotary Double-Acting Series — high-torque double-acting ball / butterfly valves, 0–120°
Semantic isolation: a straight-stroke positioner (10–150 mm linear feedback) is a different mechanical family from a quarter-turn unit (0–120° feedback). Every product here is Linear Double-Acting and must not be listed as compatible with rotary ball or butterfly valves, just as a rotary positioner must never be paired with a linear diaphragm valve.
Model: TOP-5879F1-11-LDP-21OYA1
| Item | Indicator |
|---|---|
| Input signal | 4~20mA |
| Sensor typen | N/A |
| Gas source | pressure 1.4~6bar; no oil, no moisture, no dust and dirt |
| Stroke / Travel | 10~150mm |
| Input resistance | 490 Ω (max.) / 20 mA DC |
| Electrical interface | NPT1/2 or G1/2 or custom |
| Pneumatic interface | NPT1/4 |
| Repeatability | ±0.3%F.S. |
| Linear | ±0.3%F.S. |
| Hysteresis | ±0.3%F.S |
| Sensitivity | ±0.2%F.S |
| Output characteristics | linear, quick opening (25:1, 50:1), equal percentage (1:25, 1:50) |
| Protection class | IP66 |
| Explosion-proof grade |
Non-explosion-proof (standard) |
| Security level | SIL3 |
| Fault state |
failsafe Off power, off signal, off gas, the valve is in the initial state |
| Operating temperature | -30℃~70℃ |
| Material | die-cast aluminum |
| Gross weight | 2Kg |
| Dimensions | 240L*80W*110H (mm) |
Technical matrix: Linear Double-Acting Series. This unit has 10–150 mm of straight-stroke feedback and couples to a high-thrust double-acting pneumatic piston cylinder; it is not compatible with quarter-turn ball or butterfly valves, which need a rotary positioner.
- single / double-seated globe control valves (10–150 mm)
- cage-guided sleeve (high-pressure) control valves
- high-thrust double-acting pneumatic piston-cylinder actuators
- high-differential-pressure shut-off service
On site we commission the loop in three steps: verify the 4–20 mA at the terminals, confirm a dry, oil-free air supply at 1.4–6 bar, then run a one-touch auto-tune and check linearity across the full stroke. On a double-acting cylinder we confirm that both OUT1 and OUT2 respond correctly and that the valve holds without drift; on hot service we re-zero the I/P once the housing has reached its working temperature; and where the air is aggressive we open and clean the pilot nozzle on the maintenance interval. With a vibration-resistant terminal block and non-contact magnetic feedback, the unit keeps its zero and span through years of high-frequency vibration.
- 4–20 mA electro-pneumatic (I/P) conversion — linear signal-to-pressure transfer
- Circuit thermal-drift compensation with easy on-site re-zero of I/P zero and gain
- Pilot stage (nozzle-flapper) designed for an easy clean against wet / oily dirty instrument air
- Vibration-resistant terminals + non-contact magnetic feedback — no contact bounce or linkage wear
- Linear Double-Acting matrix — for globe / cage-guided straight-stroke valves, travel 10–150 mm
- IEC 61508 SIL 3; Non-explosion-proof (standard); IP66
Trust anchors for the whole family: functional safety — IEC 61508 SIL 3; explosion protection — Ex ia IIC T4 Ga (intrinsically safe) / Ex d IIC T6 Gb (flameproof) / Ex d mb IIB T5; ingress protection — IP66.
IEC 61508 SIL 3Ex ia IIC T4 GaEx d IIC T6 GbIP66Electro-Pneumatic I/PLinear Double-ActingNon-Explosion-Proof
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.