Electric Double Acting Butterfly Valve Positioner For Pneumatic Valve Failsafe C45GF-LDA
Electric Double Acting Butterfly Valve Positioner For Pneumatic Valve Failsafe C45GF-LDA Smart valve positioner, flameproof explosion-proof Ex db, straight stroke, double acting, failsafe, stainless steel corrosion-resistant, split body anti-high temperature vibration Product Overview The TORLEO TOP...
Electric Double Acting Positioner
,Double Acting Positioner Failsafe
,Electric Fail safe Positioner
Electric Double Acting Butterfly Valve Positioner For Pneumatic Valve Failsafe C45GF-LDA
The TORLEO TOP-5879F1-C45GF-LDA is a double-acting intelligent (digital micro-processor) electro-pneumatic valve positioner for Linear (straight-stroke) valves, travel 10–150 mm, in a 316 stainless steel split body. Its split (remote-mount) architecture lets the positioner body be mounted away from a hot valve body, cutting heat transfer in high-temperature service. Two independent pneumatic outputs drive a double-acting actuator in both directions, delivering the high thrust needed for large control valves. On loss of power, signal or air, the actuator spring returns the valve to its fail-safe position. Compared with a conventional mechanical force-balance positioner, the digital platform adds advanced self-diagnostics and near-zero steady-state air consumption. A wear-free non-contact position sensor and adjustable exhaust damping prevent valve/disc fluttering under high differential pressure, while the microprocessor PID loop holds ±0.3% F.S. repeatability, linearity and hysteresis. Explosion protection: Ex db IIC T6 Gb (flameproof); functional safety: IEC 61508 SIL 3; ingress protection: IP66.
1) through a variety of combinations to indicate the operating state or warning conditions, with diagnostic, monitoring functions;
2) gas consumption is very small, not sensitive to the change of gas source pressure;
3) using the same model can be used for both straight and angular travel, through the selection of dual-acting module, dual-acting piston cylinder actuator can be controlled;
4) two-way communication with locators using HART communication protocols.
| Item | Indicator |
| Input signal | 4~20mA or 4~20mA+HART, split-range control can be set |
| Sensor type | flameproof structure rotary |
| Gas source | pressure 1.4~6bar; no oil, no moisture, no dust and dirt |
| Stroke / Travel | 10~150mm |
| Input resistance | 490 Ω (max.) / 20 mA DC |
| Electrical interface | NPT1/2 or user customized |
| Pneumatic interface | NPT1/4 |
| Repeatability | ±0.3%F.S. |
| Linear | ±0.3%F.S. |
| Hysteresis | ±0.3%F.S |
| Sensitivity | ±0.2%F.S |
| Output characteristics | linear, quick opening (25:1, 50:1), equal percentage (1:25, 1:50) |
| Protection class | IP66 |
| Explosion-proof grade | Ex db IIC T6 Gb |
| Security level | SIL3 |
| Fault state |
failsafe Off power, off signal, off gas, the valve is in the initial state |
| Operating temperature | -30℃~85℃ (host), -40℃~110℃ (sensor) |
| Material | 316 stainless steel |
| Gross weight | Main unit 3Kg, sensor 1Kg |
| Dimensions | 162L*152W*182H (mm) |
-
Nozzle baffle + symmetrical membrane valve structure, strong ability to resist dust, moisture and oil;
-
Built-in keyboard and large LCD screen, the positioner can be debugged without a handheld operator;
-
HART communication, modular design, convenient for users to choose and use;
-
Valve position output, modular design, convenient for users to choose and use;
-
Configure linear, quick opening, equal percentage and user-defined flow characteristics;
-
One-key auto-tuning operation to meet the needs of users for quick installation and one-touch smart calibration;
-
PID compound control algorithm can achieve 0.1-0.3% control accuracy.
Technical matrix: Linear Double-Acting Series. With a travel of 10–150 mm and a double-acting output, this unit belongs to the Linear family and couples to linear-motion valves only. It must not be paired with rotary valves (ball, butterfly, plug or damper) — those are quarter-turn (0–90°) valves and need a 0–120° rotary positioner, because a straight-stroke unit cannot drive a quarter-turn valve without an added mechanical linkage.
- single / double-seated globe control valves
- cage-guided sleeve (cylinder) control valves
- pneumatic diaphragm control valves
- gate and angle valves fitted with a linear actuator
Real-world field experience — an intelligent positioner has to earn the name in the field, not on the datasheet. In our long experience serving process-industry customers worldwide, and from our recent project data, the three problems that most degrade valve control are: (1) packing stiction and mechanical hysteresis at low travel; (2) pneumatic lag — dead time and volume delay between the positioner relay and a large actuator; and (3) high-frequency pipeline vibration that keeps the plug/disc oscillating and wears the trim. Our digital (microprocessor) platform attacks all three inside the control loop instead of bolting on hardware: a self-adapting PID algorithm continuously re-tunes around the stiction dead-band; a fast-acting nozzle-baffle pilot with adjustable exhaust damping shortens pneumatic lag and suppresses fluttering; and full self-diagnostics flag sensor drift, valve-signature change and faults before they become trips. At steady state the unit holds a near-zero instrument-air consumption, cutting air cost, and it stores configuration, trends and valve-signature data for predictive maintenance. Recommended air supply: 1.4–6 bar, oil-free, moisture-free and dust-free.
- Digital microprocessor platform — self-adapting PID compensates stiction and pneumatic lag in the field
- Full self-diagnostics and valve-signature storage for predictive maintenance
- Near-zero steady-state instrument-air consumption (lower air cost than force-balance positioners)
- Nozzle-baffle + symmetrical-diaphragm structure resists contaminated air (water, oil, sand, dust)
- Double-acting output for high-thrust linear actuators
- Explosion protection Ex db IIC T6 Gb, IEC 61508 SIL 3 and IP66; 316 stainless steel
All TORLEO units are manufactured under a certified quality-management system. Trust anchors: Functional safety — IEC 61508 SIL 3; Explosion protection — Ex db IIC T6 Gb (flameproof); Ingress protection — IP66. Representative certificates are shown below.
IEC 61508 SIL 3Ex db IIC T6 GbIP66Intelligent / DigitalDouble-Acting
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.