Exia IIC T4 Position Feedback Pressure Gauge Electro Pneumatic Control Valve Positioner
smart valve positioner single acting angular stroke fail safe exposion-proof with position feedback pressure gauge setProduct OverviewThe TORLEO TOP-5879F1-C41-11-RSF-21OYA2 is a pneumatic (electro-pneumatic) single-acting smart valve positioner for rotary (0–120°) spring-return valves. It converts ...
Exia electro pneumatic control valve positioner
,Feedback electro pneumatic control valve positioner
,Gauge electro pneumatic control valve positioner
smart valve positioner single acting angular stroke fail safe exposion-proof with position feedback pressure gauge set
The TORLEO TOP-5879F1-C41-11-RSF-21OYA2 is a pneumatic (electro-pneumatic) single-acting smart valve positioner for rotary (0–120°) spring-return valves. It converts a 4–20 mA control signal into precise valve positioning and drives a single controlled output port, relying on the actuator’s return spring for the reverse stroke. A non-contact position sensor and adjustable exhaust damping eliminate the wear of continuous rotation and prevent ball/disc fluttering under high differential pressure, while the microprocessor PID loop holds ±0.3% F.S. repeatability, linearity and hysteresis. Explosion protection: Ex db IIC T6 Gb; safety integrity: SIL 3; enclosure: IP66. On loss of air, signal or power the spring returns the valve to its fail-safe position. Configured with pressure-gauge set, position feedback output.
Model: TOP-5879F1-C41-11-RSF-21OYA2
| Item | Indicator |
| Input signal | 4~20mA |
| Sensor type | N/A |
| Gas source | pressure 1.4~6bar; no oil, no moisture, no dust and dirt |
| Stroke / Travel | 0~120º |
| Input resistance | 490 Ω (max.) / 20 mA DC |
| Electrical interface | NPT1/2 or G1/2 or custom |
| Pneumatic interface | NPT1/4 |
| Repeatability | ±0.3%F.S. |
| Linear | ±0.3%F.S. |
| Hysteresis | ±0.3%F.S |
| Sensitivity | ±0.2%F.S |
| Output characteristics | linear, quick opening (25:1, 50:1), equal percentage (1:25, 1:50) |
| Protection class | IP66 |
| Explosion-proof grade | Ex ia IIC T4 Ga |
| Security level | SIL3 |
| Fault state | |
| Operating temperature | -30℃~70℃ |
| Material | die-cast aluminum |
| Gross weight | 2Kg |
| Dimensions | 240L*80W*110H (mm) |
Sub-category: Rotary Single-Acting (pneumatic). With a rotary travel of 0–120° and a single controlled output port, it couples directly to rotary spring-return (single-acting) pneumatic actuators on ball valves (floating / trunnion), butterfly valves, V-port ball valves and plug valves. Linear (straight-stroke) globe/gate valves require the corresponding Linear pneumatic positioner.
- ball valves (floating / trunnion) — rotary spring-return (single-acting) pneumatic actuators
- butterfly valves — rotary spring-return (single-acting) pneumatic actuators
- V-port ball valves and plug valves — rotary spring-return (single-acting) pneumatic actuators
Real-world field experience — A pneumatic positioner lives or dies by the quality of its instrument air, and on real plants that air is rarely ideal: it carries water and oil carry-over, fine sand and dust, and can freeze or clog a conventional mechanism. Our engineers found the three most common field failures are (1) air-line contamination clogging the internal orifice / relay, (2) uneven spring stiffness and mechanical hysteresis in spring-return actuators, and (3) micro-fluttering of the ball/disc under high differential pressure. TORLEO counters these at the design level, not in the brochure: the wear-free nozzle-baffle + symmetrical-diaphragm structure is resistant to dust, moisture and oil and does not clog; the built-in microprocessor runs a PID algorithm with 0.1–0.3% accuracy and compensates stiction dead-band; adjustable exhaust damping stops fluttering; and the return spring drives the valve to its fail-safe position on loss of air, signal or power.
- Nozzle-baffle + symmetrical-diaphragm structure resists contaminated air (water, oil, sand, dust) — it does not clog
- Single-acting spring-return action with adjustable exhaust damping to prevent fluttering
- Rotary 0–120° with non-contact position sensing (no mechanical wear)
- ±0.3% F.S. repeatability, linearity and hysteresis; PID control for 0.1–0.3% accuracy
- Pneumatic supply 1.4–6 bar, oil-free / moisture-free / dust-free; fail-safe on loss of air, signal or power
- Explosion-proof options (Ex db IIC T6 Gb / Ex ia IIC T4 Ga) and SIL 3; IP66 enclosure
All TORLEO units are manufactured under a certified quality management system. Trust anchors: Functional safety — IEC 61508 SIL 3; Explosion protection — Ex db IIC T6 Gb; Ingress protection — IP66. Representative certificates are shown below.
IEC 61508 SIL 3Ex db IIC T6 GbIP66PneumaticSingle-Acting


Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.